2D Toolpath Strategies

2D machining can range from the very simple to the very complex. HSMWorks includes all the tools you need for precise control over all aspects of 2D machining, including lead in/out and transitions between passes.

  • Drilling and Hole Making
  • Face
  • Pocket
  • Adaptive Clearing
  • Contour
  • Slot
  • Thread Milling
  • Bore Milling
  • Trace

HSMWorks includes all the tools you need
for precise control over all aspects of 2D machining.

Contouring

Use HSMWorks to easily machine 2D and 3D contours. Control lead-in and lead-out with or without tool compensation. Choose multiple roughing and finishing passes and multiple depth cuts for any contour. Machine open and closed contours without creating additional geometry and eliminate sharp motion with corner smoothing.

Pocketing

Pocket toolpaths machine closed areas with and without islands. Entry can be selected anywhere on the model and set for plunge, ramp, or at a pre-drilled position. The special high-speed option creates smooth toolpaths that allow for maximum tool engagement, significantly higher feedrates, and reduced machining time and tool.

Drilling and Hole Making

HSMWorks includes powerful tools for generating drilling, counterboring and tapping operations. All operations are optimized to minimize tool travel and overall cycletime. Both standard and customized cycles are supported for all point-to-point operations, including spot-drilling, deep drilling with chip break, and boring cycles.

Drill Wizard

Using the HSMWorks Drill Wizard simplifies complex drilling operations. by analyzing part geometry to automatically identify holes for boring, counterboring and tapping.